What is a Hard Disk Platter?

This is a round magnetic disk coated in aluminum and ceramic located within the computer that facilitates permanent storage of data. The hard drive houses a set of hard drives which rotate on the same spindle at high speeds of up to 7200 revolutions per minute, however this speed may vary depending on the nature of the hard drive. During the rotations, the read write head — just as the name suggests – entrees the information from either side of the drive sectors, tracks or the cylinders availing it to the computer once the computer is turned on.


Each platters magnetic surface is partitioned into micron thickness which in turn act as a representative of a binary unit of information. The conventional size of a platter extends between 200 – 250 nanometres In width and towards the Stella region and 25 – 30 nanometres in towards the underside creating an equivalence of 100 billion bits within a square inch. Within The cobalt coated magnetic hard-disk exists a handful magnetic grains which in turn gets magnetized during the rotating. This ensures that the entire region gets magnetized.

Magnetic grains are appropriate within the hard-disk prior to to the continuous magnetic materials in that they create a favorable lesser magnetic space within the region preventing the formation of the Neel spikes: the spikes cancel their own magnetic field such that at the boundaries magnetization would only have to occur along the transition width.

The reduction in granular sizes of modern day ensures that only a single magnetic domain is created. Since magnetic domain neither grow nor shrivel, it will be therefore plausible to argue that no spikes will be formed and that the transition width will then follow the length of the granules sizes-a welcome move why the hard-disk platters would need the smaller grains.

Composition of the Hard Disk Platter

Just like noted earlier platters are encompassed of aluminum, ceramic and glass as the major ingredients. These three are brought together by applying a thin coat to each by a vacuum deposition in a process known as sputtering. The coating is a compilation of several metallic alloys that are designed to control the grain sizes orientation on the existent magnetic media. A protective carbon layer is then spread sparingly through the sputtering process. A very thin polymeric lubricant is then greased on the sputtered structure through immersion in a solvent after which the disk is screened for impurities or defects using a special sensor. The hard-drive heads within the hard-disk make radial movements all over the surface of the rotating platters to access data. For the process to be termed successful, a smooth, long lasting and perfect hard disk platter should be given off as the product.

Final Say

The quest for special platters has been on the rise since 2000 which necessitated the transition from the aluminum to glass platters due to their comparative advantages. The inception of the special technology back in 2005 led to the replacement of magnetic technology by perpendicular recording. With even a stronger quest for stability and density, further revolutions with disk-platters are anticipated.